EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32023R1073

Commission Implementing Regulation (EU) 2023/1073 of 1 June 2023 granting a Union authorisation for the single biocidal product ‘Spray On wipes’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance)

C/2023/3479

OJ L 143, 2.6.2023, p. 118–126 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/reg_impl/2023/1073/oj

2.6.2023   

EN

Official Journal of the European Union

L 143/118


COMMISSION IMPLEMENTING REGULATION (EU) 2023/1073

of 1 June 2023

granting a Union authorisation for the single biocidal product ‘Spray On wipes’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular Article 44(5), first subparagraph, thereof,

Whereas:

(1)

On 23 April 2019, Laboratorium Dr Deppe GmbH submitted to the European Chemicals Agency (‘the Agency’) an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 and Article 4 of Commission Implementing Regulation (EU) No 414/2013 (2) for Union authorisation of the same single biocidal product, as referred to in Article 1 of that Regulation, named ‘Spray On wipes’, of product-types 2 and 4, as described in Annex V to Regulation (EU) No 528/2012. The application was recorded under case number BC-VA051119-47 in the Register for Biocidal Products (‘the Register’). The application also indicated the application number of the related reference biocidal product family ‘Knieler & Team Propanol Family’, recorded in the Register under case number BC-AQ050985-22.

(2)

The same single biocidal product ‘Spray On wipes’ contains propan-1-ol and propan-2-ol as the active substances, which are included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 2 and 4.

(3)

On 8 December 2021, the Agency submitted to the Commission an opinion (3) and the draft summary of the biocidal product characteristics (‘SPC’) of ‘Spray On wipes’ in accordance with Article 6 of Implementing Regulation (EU) No 414/2013.

(4)

The opinion concludes that the proposed differences between the same single biocidal product and the related reference biocidal product are limited to information which can be the subject of an administrative change in accordance with Commission Implementing Regulation (EU) No 354/2013 (4), and that based on the assessment of the related reference biocidal product family ‘Knieler & Team Propanol Family’ and subject to compliance with the draft SPC, the same single biocidal product meets the conditions laid down in Article 19(1) of Regulation (EU) No 528/2012.

(5)

On 20 October 2022, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.

(6)

The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for the same single biocidal product ‘Spray On wipes’.

(7)

The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,

HAS ADOPTED THIS REGULATION:

Article 1

A Union authorisation with authorisation number EU-0027668-0000 is granted to Laboratorium Dr Deppe GmbH for the making available on the market and use of the same single biocidal product ‘Spray On wipes’ in accordance with the summary of the biocidal product characteristics set out in the Annex.

The Union authorisation is valid from 22 June 2023 until 31 July 2032.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 1 June 2023.

For the Commission

The President

Ursula VON DER LEYEN


(1)   OJ L 167, 27.6.2012, p. 1.

(2)  Commission Implementing Regulation (EU) No 414/2013 of 6 May 2013 specifying a procedure for the authorisation of same biocidal products in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 125, 7.5.2013, p. 4).

(3)  ECHA opinion for ‘Spray On wipes’, 8 December 2021, https://echa.europa.eu/opinions-on-union-authorisation

(4)  Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p. 4).


ANNEX

Summary of product characteristics for a biocidal product

Spray On wipes

Product type 2 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)

Product type 4 – Food and feed area (Disinfectants)

Authorisation number: EU-0027668-0000

R4BP asset number: EU-0027668-0000

1.   ADMINISTRATIVE INFORMATION

1.1.   Trade name(s) of the product

Trade name(s)

Spray On wipes

MyClean DS Tücher plus

MyClean DS Flow Pack plus

MyClean DS Tücher basic

MyClean DS Flow Pack basic

Medizid Rapid Pro Desinfektionstücher

Medizid Rapid QF Pro Flowpack

Medizid Rapid Next Desinfektionstücher

Medizid Rapid QF Next Flowpack

Bavicid Wipe

FAVORIT Wet Wipes Pro

FAVORIT Wet Wipes Classic

FAVORIT Wet Wipes Viruguard

FAVORIT Wet Wipes Pure

FAVORIT Wet Wipes Soft

FAVORIT Wet Wipes Premium

FAVORIT Wet Wipes zero

FAVORIT Wet Wipes Quick

FAVORIT Wet Wipes Maxi

FAVORIT Wet Wipes Protect

FAVORIT Wet Wipes universal

FAVORIT Wet Wipes Basic

FAVORIT Wet Wipes Basic QF

Immix Clean Pro Wipes

FAVORIT Wet Wipes Xtra

1.2.   Authorisation holder

Name and address of the authorisation holder

Name

Laboratorium Dr Deppe GmbH

Address

Hooghe Weg 35, 47906 Kempen Germany

Authorisation number

EU-0027668-0000

R4BP asset number

EU-0027668-0000

Date of the authorisation

22 June 2023

Expiry date of the authorisation

31.7.2032

1.3.   Manufacturer(s) of the product

Name of manufacturer

Laboratorium Dr Deppe GmbH

Address of manufacturer

Hooghe Weg 35, 47906 Kempen Germany

Location of manufacturing sites

Laboratorium Dr Deppe GmbH, Hooghe Weg 35, 47906 Kempen Germany

1.4.   Manufacturer(s) of the active substance(s)

Active substance

Propan-1-ol

Name of manufacturer

OQ Chemicals GmbH (formerly Oxea GmbH)

Address of manufacturer

Rheinpromenade 4a, 40789 Monheim am Rhein Germany

Location of manufacturing sites

OQ Chemicals Corperation (formerly Oxea Coperation), 2001 FM 3057 TX, 77414 Bay City United States


Active substance

Propan-1-ol

Name of manufacturer

BASF SE

Address of manufacturer

Carl-Bosch-Str. 38, 67056 Ludwigshafen Germany

Location of manufacturing sites

BASF SE, Carl-Bosch-Str. 38, 67056 Ludwigshafen Germany


Active substance

Propan-1-ol

Name of manufacturer

SASOL Chemie GmbH & Co. KG

Address of manufacturer

Secunda Chemical Operations, Sasol Place, 50 Katherine Street, 2090 Sandton South Africa

Location of manufacturing sites

Secunda Chemical Operations, PDP Kruger Street, 2302 Secunda South Africa


Active substance

Propan-2-ol

Name of manufacturer

Stockmeier Chemie GmbH & Co. KG

Address of manufacturer

Am Stadtholz 37, 33609 Bielefeld Germany

Location of manufacturing sites

INEOS Solvent Germany GmbH, Römerstrasse 733, 47443 Moers Germany


Active substance

Propan-2-ol

Name of manufacturer

Brenntag GmbH

Address of manufacturer

Stinnes-Platz 1, 45472 Mülheim an der Ruhr Germany

Location of manufacturing sites

Shell Nederland Raffinaderij B.V., 3196 KK Rotterdam-Pernis Netherlands

Exxon Mobil, LA 70805 Baton Rouge United States

2.   PRODUCT COMPOSITION AND FORMULATION

2.1.   Qualitative and quantitative information on the composition of the product

Common name

IUPAC name

Function

CAS number

EC number

Content (%)

Propan-1-ol

 

Active Substance

71-23-8

200-746-9

14,925

Propan-2-ol

 

Active Substance

67-63-0

200-661-7

44,73

2.2.   Type of formulation

AL – Any other liquid

3.   HAZARD AND PRECAUTIONARY STATEMENTS

Hazard statements

Highly flammable liquid and vapour.

Causes serious eye damage.

May cause drowsiness or dizziness.

Repeated exposure may cause skin dryness or cracking.

Precautionary statements

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. – No smoking.

Keep container tightly closed.

Avoid breathing vapours.

Use only outdoors or in a well-ventilated area.

IF INHALED:Remove person to fresh air and keep comfortable for breathing.

IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.

Immediately call a POISON CENTER/doctor.

Store in a well-ventilated place.Keep cool.

Store locked up.

Dispose of contents to an authorised waste collection point.

4.   AUTHORISED USES(S)

4.1.   Use description

Table 1. Use # 1 – hard non-porous small surface disinfection RTU wipes

Product type

PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)

Where relevant, an exact description of the authorised use

Not relevant

Target organism(s) (including development stage)

Scientific name: no data

Common name: Bacteria

Development stage:

Scientific name: no data

Common name: Yeasts

Development stage:

Scientific name: no data

Common name: Enveloped viruses

Development stage:

Field(s) of use

Indoor

Health care facilities and pharmaceutical and cosmetic industry, for example patient-near surrounding, working areas/desks, general equipment (excluding food contact surfaces): disinfection of small hard/non-porous surfaces

For professional use only.

Application method(s)

Method: Manual application

Detailed description:

Ready-to-use disinfectant wipes at room temperature (20 ± 2 °C).

The surface to be disinfected is wiped and wetted with a sufficient amount of the product, ensuring complete Coverage.

Application rate(s) and frequency

Application Rate: Minimum exposure time: for the control of bacteria, yeasts and enveloped viruses: 60 sec; Make the surface completely wet.

Dilution (%): Ready-to-use product

Number and timing of application:

A reasonable frequency of disinfection in a patient’s room is 1-2 per day. Maximum number of applications is 6 per day. No safety intervals need to be considered between the application phases.

Category(ies) of users

Industrial

Professional

Pack sizes and packaging material

Flow-pack of polyethylene (PE) composite foil with high-density polyethylene (HDPE) Flap cover, containing 80 Cellulose wipes;

Dispenser bag of PE composite foil, containing 70 Cellulose wipes used with dispenser box

4.1.1.   Use-specific instructions for use

Surfaces should always be visibly clean prior to disinfection. Maximum number of applications is 6 per day.

4.1.2.   Use-specific risk mitigation measures

See general directions for use

4.1.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use

4.1.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use

4.1.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use

4.2.   Use description

Table 2. Use # 2 – hard non-porous small surface disinfection RTU wipes

Product type

PT04 – Food and feed area (Disinfectants)

Where relevant, an exact description of the authorised use

Not relevant

Target organism(s) (including development stage)

Scientific name: no data

Common name: Bacteria

Development stage:

Scientific name: no data

Common name: Yeasts

Development stage:

Field(s) of use

Indoor

Health care facilities and food industry, for example patient-near surrounding, food preparation and handling in kitchens/restaurants): disinfection of small hard/non-porous surfaces.

For professional use only.

Application method(s)

Method: Manual application

Detailed description:

Ready-to-use disinfectant wipes at room temperature (20 ± 2 °C).

The surface to be disinfected is wetted with a sufficient amount of the product by wiping, ensuring complete coverage.

Application rate(s) and frequency

Application Rate: Minimum exposure time: for the control of bacteria and yeasts at 20 °C: 60 sec; Make the surface completely wet.

Dilution (%): Ready-to-use product

Number and timing of application:

The product can be used as often as necessary. A reasonable frequency of disinfection in kitchens is 1-2 per day. No safety intervals need to be considered between the application phases.

Category(ies) of users

Industrial

Professional

Pack sizes and packaging material

Flow-pack of polyethylene (PE) composite foil with high-density polyethylene (HDPE) Flap cover, containing 80 Cellulose wipes;

Dispenser bag of PE composite foil, containing 70 Cellulose wipes used with dispenser box

4.2.1.   Use-specific instructions for use

Surfaces should always be visibly clean prior to disinfection.

4.2.2.   Use-specific risk mitigation measures

See general directions for use

4.2.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use

4.2.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use

4.2.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use

5.   GENERAL DIRECTIONS FOR USE (1)

5.1.   Instructions for use

For professional use only.

For wipes reseal the package after opening.

5.2.   Risk mitigation measures

Avoid contact with eyes.

Keep out of reach of children

5.3.   Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First-aid measures general: Move the affected person away from the contaminated area. Get medical advice/attention if you feel unwell. If possible, show this sheet.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

Accidental release measures:Stop leak if safe to do so. Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking.Prevent entry to sewers and public waters.Wipe up with absorbent material (for example cloth). Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Take up mechanically (sweeping, shovelling). Dispose of in accordance with relevant local regulations.

5.4.   Instructions for safe disposal of the product and its packaging

Disposal must be done according to official regulations. Do not empty into drains. Do not dispose of with domestic waste. Dispose of contents/container to an authorised waste collection point. Empty the packaging completely prior to disposal. When totally empty, containers are recyclable like any other packing.

5.5.   Conditions of storage and shelf-life of the product under normal conditions of storage

Shelf-life: 24 months

Store in dry, cool, well-ventilated area. Keep container tightly closed. Keep out of direct sunlight.

Recommended storage temperature: 0 – 30 °C

Do not store at temperatures below 0 °C

Do not store near food, drink and animal feedingstuff. Keep away from combustible material.

6.   OTHER INFORMATION


(1)  Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.


Top